Back

Last Update:18-1-2023

Dr.Muazer Taha Mohamed

Email:mizhertaha_eng@uodiyala.edu.iq

View C.V Profile

Dr. Muzher Mohamed received  BsC in mechanical engineering- College of engineering_ University of  Mosul since1977 work as maintenance & production  engineer in industrial complex  Diayala to 1988 during this period went to Germany on 1980 for training course for one month. Went to Bulgaria to receive PhD & received this degree 1997 from Technical University Sofia (TU) worked as lecturer in TU from 1997 to 2000 ,started academic work in college of engineering University of  Diayala  from 2011as a lecturer for many subjects like Air conditioning & refrigeration , engineering analysis ,numerical analysis, industrial engineering ,engineering  management & manufacturing processing .published  many researches inside & outside Iraq

.Become assistant prof. on 1|2|2012.

Dr:Adel K.Mahmoud

Email:adel_mahmoud_eng@uodiyala.edu.iq

View C.V Profile

 

Dr.Ali Adwan Hammood Al Katawy

Email:Dr.ali_edwin@uodiyala.edu.iq

View C.V Profile

is a Lecturer in the Department of Material Engineering, Engineering College, Diyala University, Diyala, Iraq. he has more than 12 years of teaching and research experience. His major research interest includes metal engineering, manufacturing science, metal cutting, optimization of designof heat treatment. he has published more than 7  research papers in the refereed international/national journals and conferences. He received B. Sc. in mechanical Engineering and Metallurgy from University of Bagdad,- Baghdad, Iraq (1990). He received M. Sc. in Production Engineering from University of Technology, Baghdad, Iraq (2002). He also received his Ph.D. in Production Engineering/ Metal  and heat treatment from Ural technical university in ekatrenbyrg, Russia(2013).

Dr.SAIB  THIAB  ALWAN 

View C.V Profile

Saib_Alwan_eng@uodiyala.edu.iq

is a Lecturer in the Department of Material Engineering, Engineering College, Diyala University, Diyala , Iraq .He  got(B.Sc.)at physics Science in 1992  from AL – Mustansyria university. In 1997, He  received Master Degree (M. Sc.) ,(very good). The title of the thesis [ A study of the optical and  electrical properties of (Znx Se1-x ) thin films prepared by thermal evaporation]. In 2008 , He  received   (Ph.D.) Degree,(very good) The title of the thesis [Simulation and measurements effect filler type and  multilayer on dielectric property of composite materials at ( X – Band ) region].

Dr.Ahmed Falh Hasan

ahmed.a.fadhil@uodiyala.edu.iq

View C.V Profile

Dr. Ahmed Falh Hasan has B.Sc and M.Sc in metallurgy engineering from the university of technology Baghdad, Iraq; in 1999 and 2002 correspondingly. In 2016 Ahmed has a PhD in material design and material engineering from the University of Nottingham UK-England. He worked as an academic teaching staff member from 2005 to 2011. Since 2007 to 2011 he has worked as a department coordinator for the Department of Communications Engineering. Ahmed has more than eight papers which were published in local and international journals and conferences. My research covers two main themes:

Friction Stir Welding ‘FSW’, experimental and simulation Tool wear modelling I am also work with high viscous flow behaviour modelling using Computational fluid dynamics ‘CFD’

Dr.Suha K. Shihab (Head of Department)

Email:suha_shihab_eng@uodiyala.edu.iq

View C.V Profile

SUHA K. SHIHAB is a Lecturer in the Department of Material Engineering, Engineering College, Diyala University, Diyala, Iraq. She has more than 17 years of teaching and research experience. Her major research interest includes production engineering, manufacturing Engineering, Machining, Manufacturing Process Optimization, Design of Experiment (DOE) in products and processes, and Finite Element Analysis Program (ANSYS). She has published more than 30 research papers in the refereed international/national journals and conferences. She received B. Sc. in Production Engineering and Metallurgy from University of Technology, Baghdad, Iraq (1997). She received M. Sc. in Production Engineering from University of Technology, Baghdad, Iraq (2005). She also received her Ph.D. in Production Engineering/ Manufacturing and Machining Processes from Jamia Millia Islamia in New Delhi, India (2015).

Dr.Abeer Ahmed Shihab

Email:abeer_shihab_eng@uodiyala.edu.iq

View C.V Profile

Bachelor in Mechanical Engineering, Faculty of Engineering, University of Baghdad in 2000, holds a diploma degree in Power, technical college Baghdad, Central Technical University in 2008, holds a master's degree in laser applications in mechanical engineering, industrial and engineering applications, Institute of Laser for Postgraduate Studies, University of Baghdad in 2011, PhD in Laser Applications in Mechanical Engineering, Industrial and Engineering Applications Branch, Institute of Laser  for Post  Graduate Studies, University of Baghdad, 2015. He worked in Al-Nedaa Company for the design and manufacture of mechanical molds for the period from 2000 to 2003. He has seven publications. His research interests focus on welding, laser applications in mechanical engineering (welding, perforation, cutting, surface heat treatment).     

Dr.Salem Farman Salman

Email:salim_alizi_eng@uodiyala.edu.iq

View C.V Profile

MSc Mechanical Engineering 1985 Polytechnic University Foulkkrad / USSR, PhD Mechanical Engineering – Applied Mechanics / Madi University – Moscow – Russian Federation 1992-1993. Current research interests are related to vibration, mechanical stress analysis and mechanical corrosion. Experience in engineering consulting with international and Arab companies, teaching for more than 22 years in Arab and Iraqi universities and institutes. Head of Mechanical Engineering Department, Faculty of Engineering, University of Nasser, Libya, Head of Mechanical Engineering Department, Faculty of Engineering,  Diyala University 2014-2016. Senior supervisor on teaching common materials and graduation projects. Currently a member of the teaching board in the Department of Materials Science 

Dr. Jabbar GATTMAH

jabbar_gutma_eng@uodiyala.edu.iq

View C.V Profile

Dr. Jabbar GATTMAH received all his degrees in mechanical engineering. The major experience in field of material forming during the designing and manufacturing the dies and tools. Other experiences are Manufacturing and Machining, Engineering Elasticity and Plasticity, Production Engineering, Techniques of Residual Stresses Measurement, and Computer Aided Design as well as Finite Element Analysis and Simulation using various software.

Dr. Wissam Saadon Ibrahim

wisam_ibrahim_eng@uodiyala.edu.iq

View C.V Profile

Publications

 

Dr. Sami A. Nawi

sami_nawi_eng@uodiyala.edu.iq

View C.V Profile

Publications

 

Dr.Ahmed Abed Ali Ghaidan

Email:

View C.V Profile

 

Ahmed Abed Ali Ghaidan received his Bachelor degree in Mechanical Engineering from the Al-Mustansiriya University1995. Worked as an engineer in the Ministry of Industry and Minerals until 2006. He received his Master's degree in Mechanical Engineering / Energy from Al-Mustansiriya University in 2006 and then moved to the Ministry of Higher Education. He joined his PhD in 2014 and received his PhD / Thermofluid 2018 from the University of Sheffield – UK. During his doctoral studies, he helped oversee graduation projects and practical experiences for undergraduate and master students at the University of Sheffield. Become an Associate Fellow at the Higher Education Academy (HEA) after completing a set of requirements and specialized courses.

Research interests are concentrated in Porous media, IR thermography, Signal and Image processing, Laser Doppler Anemometry (LDV).

Dr.Ekhlas Edan Kader

Email:ekhlasedan_eng@uodiyala.edu.iq

View C.V Profile

Position: head of mechanical engineering Academic achievement :Bsc. From mechanical engineering department / university of Baghdad  at 1992 ,Msc from  mechanical engineering department / university of technology at 2008 ,Phd . from  mechanical engineering department / university of technology at 2014 Teaching field:  engineering mechanics (static )2008- 2010 first class,dynamic .2008- 2010 second class,physics. 2015-2016 first class, theory of machine 2010- 20012  third class ,structural vibration.2012-2017 forth class

Dr. Shaimaa M. Ameen

Sheymaa_alzzzawi_eng@uodiyala.edu.iq

View C.V Profile

 

Mrs.Aghadeer Ahmed Abass

aghadeer@engineering.uodiyala.edu.iq

View C.V Profile

Bachelor degree in civil engineering BSc in civil engineering from AL-Mustansiriyah University/ Baghdad/ Iraq at 2002 and MSc in civil engineering from People Friendship  University of Russia /Moscow at 2016. Presently working as an assistant lecturer at engineering college- Diyala university- Iraq. Research Interest: Construction Materials , Structural Analysis, Finite Element Modeling.

Dr. Abdul Jabbar Saad Jomaa

abdaljabar.saad@uodiyala.edu.iq

View C.V Profile

 

Dr. Ayad Naseef Jasim AlNuaimi

ayad.naseef@uodiyala.edu.iq

View C.V Profile

 

Dr.Ali N. Jbarah

Email :

View C.V Profile

B. Sc. Power and Electrical Machines, (July, 2006), College Of Engineering – University Of Diyala, Iraq. M.Sc. Power Engineering – Renewable  nergy, (July, 2014) Kazan National Research – Technical University KAI – Russia I am working as an assistant Lecturer in a Martials engineering Dept. My research interests focus on renewable energy, Solar and Wind Energy.

Mr.Abbas Hussain Taha

Email :abbas_taha_eng@uodiyala.edu.iq

View C.V Profile

is assistant lecturer in the Department of Material Engineering, Engineering College, Diyala University, Diyala, Iraq. he has more than 12 years of teaching and research experience. His major research interest includes experimental physics, metal physics. he received B. Sc. in physics department Al-Mustasiria university, Baghdad, Iraq (2001). he received M. Sc. in experimental physics from Mansoura University, Egypt, (2015).

Mrs.Athil S. Ibrahim

athi_ibrahim_eng@uodiyala.edu.iq

View C.V Profile

Assistant lecturer. Athil S. Ibrahim has a Master’s degree in Advanced Materials Engineering/ Sheffield Hallam University/ UK (2016). Graduated from the University of Technology- Baghdadin which she obtained her Bachelor’s degree in Materials Engineering- 2005. Presently working as an assistant lectureratengineering college- Diyala university- Iraq

Mrs.Hala M. Kadhim

Email:hala_kadhum_eng@uodiyala.edu.iq

View C.V Profile

Hala M. Kadhim is an assistant lecture at department of Material Engineering/ University of Diyala. She had a Bachelor degree of Material Engineering from University of Technology in 2005. She get her master degree at Türk Hava Kurumu Üniversitesi, Turkey in 2017. She has a good experience with material manufacturing

Mrs.Wassan S. Hussain

wasan_hussein_eng@uodiyala.edu.iq

View C.V Profile

Wassan S. Hussain is an assistant lecture at department of Material Engineering/ University of Diyala. She had a Bachelor degree of Material Engineering from Al-Mustansiriya University in 2015. She gets her master degree at Al-Mustansiriya University in 2018. She has a good experience with material science fundamentals and engineering drawing

Mrs.Samah Rasheed Hassan

semah_raesheed_eng@uodiyala.edu.iq

View C.V Profile