سهى كريم شهاب
 |
مدرس دكتور في قسم هندسة المواد –كلية الهندسة-جامعة ديالى . هي تمتلك اكثر من 17 سنة خدمة في مجال التعليم والبحث العلمي. الاهتمام البحثي لها في يتضمن مجالات هندسة الانتاج, هندسة التصنيع ,التشغيل, الاختيار الامثل في عمليات التصنيع باستخدام تصميم التجارب في العمليات الانتاجية, تحليل العناصر المحددة بأستخدام برنامج الانسز. هي تمتلك اكثر من 30 بحث مشارك فيه بمجلات عالمية ومؤتمرات عالمية مختصة بطرق تصنيع وتشغيل المواد. حصلت على درجة البكالوريوس في هندسة الانتاج والمعادن –الجامعة التكنلوجية-العراق عام 1997 وحصلت على درجة الماجستير في هندسة الانتاج –الجامعة التكنلوجية عام 2005 ودرجة الدكتوراه في هندسة الانتاج- عمليات التصنيع والتشغيل من الجامعة الملية الاسلامية / دلهي - الهند عام 2015.
اهتماماتها العلمية الحالية تتركز في بطرق تصنيع وتشغيل المواد في هندسة الميكانيك والمواد
|
|
الجدول الاسبوعي:
اليوم
|
المادة
|
المرحلة
|
الوقت
|
الأحد
|
فحص مواد
|
الثالثه/الدراسة الصباحية
|
8:30 - 11:30
|
الأثنين
|
تصنيع مواد
|
الرابع/الدراسة الصباحية
|
8:30 - 11:30
|
الأثنين
|
مشروع
|
الرابع/الدراسة الصباحية
|
1:30 - 11:30
|
الخميس
|
مختبر فحص مواد
|
الثالثة/الدراسة الصباحية
|
2:30 - 12:30
|
|
المحاضرات :
عنوان المحاضرات
|
تسلسل المحاضرات
|
للمرحلة الرابعة
|
مقدمة عن عمليات التصنيع للمواد
|
المحاضرة الاولى
|
عمليات السباكة
|
المحاضرة الثانية
|
طرق السباكة
|
المحاضرة الثالثة
|
السباكةالرملية
|
المحاضرة الرابعة
|
سباكة بالقوالب
|
المحاضرة الخامسة
|
السباكة بالطرد المركزي
|
المحاضرة السادسة
|
عيوب السباكة
|
المحاضرة السابعة
|
ميتالورجيا المساحيق
|
المحاضرة الثامنة
|
عمليات التشغيل
|
المحاضرة التاسعة
|
اشكال عدد القطع
|
المحاضرة العاشرة
|
مواد عدد القطع
|
المحاضرة الحادي عشر
|
متغيرات عملية القطع
|
المحاضرة الثاني عشر
|
نظريةالقطع
|
المحاضرة الثالث عشر
|
الخراطة
|
المحاضرة الرابع عشر
|
التفريز
|
المحاضرة الخامس عشر
|
التقيب
|
المحاضرة السادس عشر
|
التجليخ
|
المحاضرة السابع عشر
|
الصقل
|
المحاضرة الثامن عشر
|
- Manufacturing Science , Ghosh and Mallik
- Fundamentals of Modern Manufacturing, Mikell P. Groover
- Processes and Materials of Manufacturing, ROY A. LINDBERG
|
المصدر
|
|
|
عنوان المحاضرات
|
تسلسل المحاضرات
|
للمرحلة الثالثة
|
Introduction about Materials inspection
|
المحاضرة الاولى
|
Tensile Test
|
المحاضرة الثانية
|
compression Test
|
المحاضرة الثالثة
|
Torsion Test
|
المحاضرة الرابعة
|
Hardness Test
|
المحاضرةالخامسة
|
Bending Test
|
المحاضرةالسادسة
|
Impact Test
|
المحاضرة السابعة
|
Creep Test
|
المحاضرة الثامنة
|
Fatigue Test
|
المحاضرة التاسعة
|
Visual Test
|
المحاضرة العاشرة
|
Liquid Penetration Test
|
المحاضره الحادي عشر
|
Magnetic Particle Test
|
المحاضرة الثاني عشر
|
|
Ultrasonic Test
|
المحاضرة الثالث عشر
|
|
Radiography Test
|
المحاضرة الرابع عشر
|
|
Eddy Current Test
|
المحاضرة الخامس عشر
|
|
Refference
|
المصدر
|
|
|
النشر المحلي والعالمي:
S.K. Shihab, Exploring the Effect of Dimensional Tolerance of the Inserts During Multi-Objective Optimization of Face Hard Milling Using Genetic Algorithm, Engineering and Technology Journal, Vol. 35, Part A. No. 4, 2017 |
Shagufta, Suha K. Shihab, Zahid A. Khan, Arshad Noor Siddiqueed,Nidhi Sharma, Optimization of Wire Electrical Discharge Machining Process Parameters Using Genetics Algorithm, International Journal of Scientific & Engineering Research, Volume 8, Issue 7, July-2017. |
P.V.Suresh Babu, Anil Kumar, Suha K. Shihab, Arshad Noor Siddiquee, An investigation on Effects of End Milling process on Noise during Machining of Copper, International Journal of Scientific & Engineering Research, Volume 8, Issue 7, July-2017 |
Md Kashif Reza, Suha Karim Shihab , Noor Zaman Khan, Mohd Atif Wahid, Investigation on The Effect of Drilling Process Parameters on Surface Roughness, International Journal of Scientific & Engineering Research, Volume 8, Issue 7, July-2017 |
Md Nasimuddin, Noor Zaman Khan, Suha K. Shihab, Arshad Noor Siddiquee, Optimization Of Turning Parameters Using Taguchi Method, International Journal of Scientific & Engineering Research, Volume 8, Issue 7, July-2017. |
Fayaz Ahmad Mira, Zahid A. Khanb, Arshad Noor Siddiqueeb, Suha K. Shihab, Investigations on the Effect of Radius Milling Process Parameters on Surface Roughness, International Journal of Scientific & Engineering Research, Volume 8, Issue 7, July-2017 |
Suha K. Shihab, Zahid A. Khan, Arshad Noor Siddiquee, Application of Grey Relational Analysis Along with Principal Component Analysis for Multi-Response Optimization of Hard Turning, International Journal of Engineering Trends and Technology (IJETT), 38 (5), pp. 238-245, August 2016.
|
Suha K. Shihab, Ethar Mohamed Mahdi Mubarak, Evaluation of Surface Roughness and Material Removal Rate in End Milling of Complex Shape, Universal Journal of Mechanical Engineering 4(3): 69-73, 1st July, 2016
|
Suha K. Shihab, Zahid A. Khan, Arshad Noor Siddiquee, Analysis of chip morphology in dry hard turning of AISI 52100 alloy steel using RSM, International Journal Machining and Machinability of Materials, 17(6), pp. 481–506, 2015
|
Suha K. Shihab, Zahid A. Khan, Arshad Noor Siddiquee, Noor Zaman Khan, A Novel Approach to Enhance Performance of Multilayer Coated Carbide Insert in Hard Turning, Archive of Mechanical Engineering, VOL. LXII, No. 4, pp. 539-552, 2015.
|
Noor Zaman Khan, Arshad Noor Siddiquee, Zahid A. Khan, Suha K. Shihab, Investigations on tunneling and kissing bond defects in FSW joints for dissimilar aluminum alloys, Journal of Alloys and Compounds, Vol.648, pp.360-367, 2015.
|
Suha K. Shihab, Arindam Kumar Chanda, Multi Response Optimization of Milling Process Parameters Using MOORA Method, International Journal of Mechanical And Production Engineering, ISSN: 2320-2092, Volume- 3, Issue-4, April-2015.
|
Suha K. Shihab, Zahid A. Khan and Arshad Noor Siddiquee, RSM Based Investigations on the Effects of Cutting Parameters on Surface Integrity during Cryogenic Hard Turning of AISI 52100, Journal of Manufacturing Science and Production, DOI 10.1515/jmsp-2015-0009, pp.1-10, 2015.
|
Suha K. Shihab, Zahid A. Khan and Arshad Noor Siddiquee, Investigation on the effect of machining parameters on the corner radious in pocket milling, Global Sci-Tech,7 (4), pp. 1-7, October-December 2015.
|
Noor Zaman Khan, Suha K. Shihab, Nidhi Sharma, Atif Wahid, Arshad Noor Siddiquee, Zahid A. Khan, Investigation on the effect of WEDM process parameters on surface roughness, Global Sci-Tech, Vol.7, No.1, pp. 1-9, January- March 2015.
|
Suha K. Shihab, Zahid A. Khan, Aas Mohammad, Arshad Noor Siddiquee, A Review of Turning of Hard Steels Used in Bearing and Automotive Applications, International Journal of Production & Manufacturing Research, Vol. 2, No. 1, pp.24-49, 2014.
|
Suha K. Shihab, Zahid A. Khan, Aas Mohammad, Arshad Noor Siddiquee, RSM based study of cutting temperature during Hard Turning with Multilayer Coated Carbide Insert, Procedia Materials Science, Vol.6, pp.1233 -1242, 2014
|
Suha K. Shihab, Zahid A. Khan, Aas Mohammad, Arshad Noor Siddiquee, Cryogenic hard turning of alloy steel with multilayer hard surface coatings (TiN/TiCN/Al2O3/TiN) insert using RSM, International Journal of Current Engineering and Technology, Special Issue-2, E-ISSN 2277 – 4106, P-ISSN 2347 – 5161, February 2014.
|
Suha K. Shihab, Zahid A. Khan, Aas Mohammad, Arshad Noor Siddiquee, Investigations on the effect of CNC dry hard turning process parameters on surface integrity: a multi-performance characteristics optimization, Int. J. Manuf. Sci. Prod (IJMSP), DOI 10.1515/jmsp-2013-0019, 2014.
|
Suha K. Shihab, Zahid A. Khan, Aas Mohammad, Arshad Noor Siddiquee, Optimization of Surface Integrity in Dry Hard Turning Using RSM, Sadhana, Vol. 39, Part 5, pp. 1035-1053, October 2014.
|
Suha K. Shihab, Zahid A. Khan, Aas Mohammad, Arshad Noor Siddiquee, Investigation of Surface Integrity during Wet Turning of Hard Alloy Steel, Int. J. Machining and Machinability of Materials, Vol. 16, No. 1, pp.22-37, 2014.
|
Suha K. Shihab, Zahid A . Khan, Aas mohammad, Arshad Noor Siddiquee, Effect of Cryogenic Cooling on Surface Integrity in Turning of Hard Alloy Steel, Indian Journal of Applied Research, Volume 3, Issue 7, ISSN - 2249-555X, pp. 3-7, July 2013.
|
Suha K. Shihab, Zahid A. Khan, Aas mohammad, Arshad Noor Siddiquee, Effect of Cutting Parameters on Cutting Forces and MRR During Turning Hard Alloy Steel With and Without Coolant, International Journal of Engineering and Advanced Technology (IJEAT), ISSN: 2249- 8958, Volume-3, Issue-1, pp.14-30, October 2013.
|
Suha K. Shihab, Zahid A. Khan, Aas mohammad, Arshad Noor Siddiquee, Application of Response Surface Methodology for Determining Cutting Forces in Hard Turning Using Castrol Coolant, Advanced Materials Manufacturing & Characterization, Vol. 3 Issue 1, pp.27-36, 2013.
|
Saad Theeyab Faris, Suha Karim Shihab, Study and Design the Hydrodynamic Deep Drawing Process for Blanks of Non Uniform Thickness, Diyala Journal of Engineering Sciences, pp. 40-56, 22-23 Dec. 2010.
|
Suha K. Shihab, Finite Element Analysis of The Influence of Edge Roundness on The Stresses and Cutting Forces for Ceramic Cutting Tools, Diyala Journal of Engineering Sciences, Vol. 02 , No.1, pp. 1-12 , June 2009
|
Suha K. Shihab, Ethar M. Mubarak, Study of the Ceramic Cutting Tool Performance Using Double Rake Face, Diyala Journal of Engineering Sciences, Vol. 01, No. 01, pp. 1-18, 2008.
|
Maan Aabid Tawfiq, Suha Kareem Shihab, A Finite Element Analysis of Orthogonal Machining UsingDifferent Tool Edge Geometries, Eng. & Technology, Vol.25, No.4, pp.569-583, 2007.
|
Suha K. Shihab, Study the Effect of Depth of Cut on the Cutting Tool by Using Finite Element Method, Diyala Journal for Applied Research (DJAR),Vol.3, No.2, 2007.
|
Suha K. Shihab, Zahid A. Khan, Aas Mohammad, Arshad Noor Siddiquee, The Effect of Cutting Parameters on Surface Integrity during Hard Turning Using Castrol Coolant, World Academy of Science, Engineering and Technology, Istanbul, Issue78, pp. 1703-1709, June 2013.
|
Suha K. Shihab, Zahid A. Khan, Aas Mohammad, Arshad Noor Siddiquee, Analysis of cutting forces and material removal rate in dry hard turning using response surface methodology, International Conference on Automation and Mechanical Systems, Faridabad, 21-22, pp.175-187, March 2013.
|
Jabbar Kasim Jabbar and Suha Karim Shihab, Using Technique of Contact Element for Wire Drawing by Using Finite Element Method, International Engineering Convention, Damascus, Syria, 11-14 May 2009.
|
|
|
|